Baroness LM551, Руководство по обслуживанию, Страница: 88 / 213

General Inspection and Repair
Battery
Handling of the Battery
For safe use of the battery, observe the
following precautions:
Danger Danger
Do not allow anyone to handle the battery who
does not fully understand the correct battery
handling procedures and relevant dangers.
When handling the battery, wear protective
glasses and rubber gloves, etc.
Do not use batteries with the electrolyte level
below LOWER LEVEL.
Doing so will shorten the battery operating life
and cause an explosion.
Do not continue using the battery if the
connection cable terminals are loose or the
terminals are corroded.
Failure to observe these precautions could
cause a fire or an explosion.
Warning
Before inspecting the battery or other work,
touch a metallic part of the machine away
from the battery with bare hands to discharge
any static electricity.
Static electricity can cause ignition.
Do not use a dry cloth, tissue paper or similar
to clean the battery.
Doing so may cause ignition due to static
electricity.
Keep the battery away from open flames.
Hydrogen gas may be generated from the
battery. Improper handling of the battery
could cause a fire or explosion.
Danger Danger
Do not use the battery near open flames or in
a poorly ventilated area. Keep the battery
away from lit cigarettes and other open
flames.
Do not short-circuit the battery.
If the positive and negative terminals are
connected to each other by a metallic tool, the
battery will short-circuit. And a short-circuit will
also occur if the positive terminal contacts
another metallic part (machine body, etc.).
1.
The electrolyte contained in the battery is
sulfuric acid.
Contact of the electrolyte (sulfuric acid) with
the skin could cause blindness or burns.
Contact of the electrolyte with the machine
etc. could cause damage to the machine. 2.
LM551
Electrical System
Page 5-2
General Inspection and Repair