Baroness LM551, Руководство по эксплуатации для владельца, Страница: 55 / 102

Mower Lock Lever (Latch)
The mower lock levers (latches) are located in
the foot area on the left and right sides and are
used when storing the machine with mower
units #4 and #5 raised.
When storing this machine, hook the mower
lock levers (latches) on the arms.
1
xqolpb-002
Mower Lock Lever (Latch)_001
1 Mower Lock Lever (Latch)
Mower Unit Up/Down Lever
Caution
Before raising or lowering the mower units,
make sure that there are no people around
the machine.
Caution
Be careful of the mower units lowering when
the mower unit up/down lever is shifted to the
"Down" position and the key switch is turned
to the "ON" position while the engine is
stopped.
Important
When the mower lock levers (latches) are
engaged, do not operate the mower unit up/
down lever.
The mower unit up/down lever is located in the
operation panel and raises or lowers the
mower units.
When the lever is shifted to the "Down"
position, the mower units are lowered. When
the lever is shifted to the "Up" position, the
mower units are raised.
When the lever is shifted to the "UP" position
and then released from the hand, the lever
returns to the neutral position.
1
A
C
B
lwkjk9-003
Mower Unit Up/Down Lever_001
1 Mower unit up/down lever
A Up
B Neutral
C Down
Note:
When the mower units are raised, the reel
cutters (cutting cylinders) stop rotating even if
the reel rotation switch is set to the "Rotation"
position.
Throttle Lever
The throttle lever is located in the operation
panel and enables you to adjust the engine
rpm.
Move the throttle lever toward the "High speed"
position to increase the engine rpm, and
toward the "Low speed" position to reduce the
rpm.
Note:
The factory default maximum engine rotation
speed is set to 3,000 rpm.
A
B
1
ef6hsk-016
Throttle Lever_001
1 Throttle lever
A High speed
B Low speed
Handling Instructions
LM551
Handling Instructions
Page 4-31
Operation of Each Section