Baroness LM551, Руководство по эксплуатации для владельца, Страница: 45 / 102

1 Washer
2 Nut
A Length
Procedure to Start / Stop Engine
Start / Stop of Engine
Procedure to Start Engine
Caution
Before starting the engine, make sure that
there are no other people or obstacles around
the machine.
Caution
Be careful of the mower units lowering when
the mower unit up/down lever is shifted to the
"Down" position and the key switch is turned
to the "ON" position while the engine is
stopped.
Important
Starter operation must take 15 seconds or
less.
If the engine still does not start, stop using the
battery for 30 to 60 seconds to avoid
exhausting the battery.
Open the fuel cock of the water separator.
1
v2e27i-067
Procedure to Start Engine_001
1 Water Separator
Sit on the seat.
Make sure that you have depressed the
brake pedal and applied the parking brake.
Set the reel rotation switch to the "Stop"
position.
Move the mower unit up/down lever to the
neutral position.
1.
2.
3.
4.
5.
Make sure that the traveling pedal is in
neutral position.
Move the throttle lever from the "Low
speed
” position halfway toward the "High
speed
”
position.
Important
The thermo-start lamp turns off at the
specified time. However, the lamp turning off
is not related to the glow plug generating heat.
If the ignition key is left in the "GLOW"
position after the lamp is turned off, the plug
will still generate heat.
The thermo-start lamp will stay illuminated for
five seconds.
Switch the ignition key to the "GLOW"
position.
1
A
B
C
D
v2e27i-010
Procedure to Start Engine_002
1 Ignition key
A OFF
B ON
C GLOW
D START
Make sure that the glow plug is generating
heat and the thermo-start lamp is turned on.
1
q44uug-002
Procedure to Start Engine_003
1 Thermo-start lamp
6.
7.
8.
9.
Handling Instructions
LM551
Handling Instructions
Page 4-21
Procedure to Start / Stop Engine