
Change of Fuel Filter Element
If dust or dirt accumulates in the fuel filter, the
fuel flow will become insufficient.
Replace the fuel filter at the appropriate times.
The fuel filter is located on the left under the
hood.
Close the fuel filter cock.
A
B
1
v2e27i-014
Change of Fuel Filter Element_001
1
Fuel cock
A
ON (Open)
B
OFF (Close)
Remove the retaining ring and then remove
the cup.
1
2
3
4
zihgka-001
Change of Fuel Filter Element_002
1
O-ring
2
Element
3
Cup
4
Retaining ring
1.
2.
Clean the inside of the cup with light oil.
Important
When installed, be careful that it is not
contaminated with dirt or dust.
If the fuel is contaminated with dirt or dust
etc., the fuel injection pump and injection
nozzle will become worn.
Install a new element and put the parts back
together.
Fill up the fuel tank with fuel and open the
fuel cock.
1
2
A
B
3
3
kou8ls-003
Change of Fuel Filter Element_003
1
Fuel cock
2
Fuel filter
3
Air-bleeding plug
A
ON (Open)
B
OFF (Close)
The key is turned to the "ON" position.
The fuel pump is operated after replacement,
air bleeding will occur automatically.
Turn the key to the "START" position and
remove air out of the fuel line.
In the case that there are still air bubbles in
the fuel from air-bleeding plug even after 15
seconds or more pass after setting the
ignition key to "START", pause for 30
seconds or more and then repeat the same
steps.
3.
4.
5.
6.
7.
8.
Maintenance
LM531
Maintenance
Page 5-23
Maintenance Work
Содержание LM531
