Baroness LM531, Руководство по эксплуатации для владельца, Страница: 51 / 96

Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following four conditions.
An operator is sitting on the seat.
The parking brake is applied.
The reel rotation switch is set to the "OFF"
position.
The traveling pedal is set to the neutral
position.
In the event the operator leaves the seat with
the parking brake applied and the engine
running, the safety device will be activated
and will stop the engine under any of the
following conditions:
The traveling pedal is not set to the neutral
position. (The operator has depressed the
traveling pedal.)
The reel rotation switch is set to the
"Rotate" position.
However, when the reel reverse switch is
set to the "ON" position (reverse rotation),
the engine does not stop.
Warning Mechanisms
Caution
When the buzzer (intermittent tone) sounds,
be sure to stop operation since the engine is
overheated.
Do not stop the engine without idling. Allow
the engine to cool down, first. Keep the engine
idling for about 5 minutes before stopping.
Remove dust that is jamming in the radiator,
air cleaner, and etc.
This machine features warning mechanisms for
overheating and for the hydraulic oil level.
If water temperature inside the engine
exceeds 105 degrees Celsius, a buzzer will
sound. (intermittent tone)
If the oil level in the hydraulic tank declines
from the specified level by approximately 4.2
dm
3
(4.2 L), a buzzer will sound. (intermittent
tone)
1.
･
･
･
･
2.
･
･
1.
2.
Operation Method
Cautions for when You Leave The
Machine
Caution
If the brakes are not sufficiently effective, use
the wheel stoppers to secure the machine.
Caution
Never park the machine on a slope.
Park the machine on level ground.
Apply the parking brake.
Stop the engine.
Remove the ignition key.
Leave the machine.
Positions of Operation Decals
6
1
2
3
5
4
6n6oux-089
Positions of Operation Decals_001
1.
2.
3.
4.
5.
Handling Instructions
LM531
Handling Instructions
Page 4-21
Operation Method