Baroness LM531, Руководство по эксплуатации для владельца, Страница: 41 / 96

Water Separator
Inspection of Water Separator
For details on handling the engine, please
refer to the Engine's Owner's Manual.
Important
Water contamination in the fuel may decrease
the engine starting performance and power
output and may result in breakage of engine
parts.
The water separator removes water from the
fuel.
Make sure that debris and water have not
accumulated in the cup.
With the float raised, water incorporation is
confirmed.
When the float reaches the discharge level,
discharge water.
1
3
2
v1spa6-004
Inspection of Water Separator_001
1 Float
2 Cup
3 Discharge level
Draining of Water Separator
Important
Water contamination in the fuel may decrease
the engine starting performance and power
output and may result in breakage of engine
parts.
Drain water from the water separator
according to the maintenance schedule.
And drain water whenever the float is raised
by water.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
1.
1.
2.
Close the fuel filter cock.
Close the fuel cock of water separator.
1
2
A
B
v1spa6-005
Draining of Water Separator_001
1 Fuel cock
2 Air-bleeding plug
A ON (Open)
B OFF (Close)
Remove the retaining ring and then remove
the cup.
3
2
1
v1spa6-006
Draining of Water Separator_002
1 Retaining ring
2 Cup
3 Element
Discharge water from the cup.
Important
When installed, be careful that it is not
contaminated with dirt or dust.
If the fuel is contaminated with dirt or dust
etc., the fuel injection pump and injection
nozzle will become worn.
Put the parts back together.
Fill up the fuel tank with fuel and open the
fuel cock.
3.
4.
5.
6.
7.
8.
Handling Instructions
LM531
Handling Instructions
Page 4-11
Inspections