Baroness LM331, Руководство по эксплуатации для владельца, Страница: 50 / 103

Oil Cooler
Inspection of Oil Cooler
Make sure that there is no damage to the
oil cooler.
Make sure that the oil cooler is not
contaminated.
Cleaning of Oil Cooler
Important
An unclean oil cooler may cause malfunction
of the hydraulic system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the oil cooler has been contaminated with
dust, be sure to clean it.
Especially after operating the machine in a
dusty environment, it is important to remove
dust as soon as possible.
Open the hood.
"Opening and Closing of Hood" (Page 5-2)
Carefully clean the front and back of the oil
cooler with water or compressed air.
1
2
3
va4j43-010
Cleaning of Oil Cooler_001
1 Hood
2 Radiator
3 Oil cooler
1.
2.
1.
2.
Hydraulic Oil
Inspection of Hydraulic Oil
The oil gauge is located on the back of the
hydraulic tank.
Raise the mower units and maintain that
position on a level surface.
Make sure that the oil level is at the middle
of the oil gauge.
1
olekci-005
Inspection of Hydraulic Oil_001
1 Oil gauge
Check underneath the machine for
hydraulic oil leakage.
1.
2.
3.
LM331
Handling Instructions
Page 5-6
Inspection and Cleaning