Baroness LM331, Руководство по эксплуатации для владельца, Страница: 44 / 103

Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following four conditions.
An operator is sitting on the seat.
The parking brake is applied.
The reel rotation switch is set to the "OFF"
position.
The traveling pedal is set to the neutral
position.
In the event the operator leaves the seat with
the parking brake applied and the engine
running, the safety device will be activated
and will stop the engine under any of the
following conditions:
The traveling pedal is not set to the neutral
position. (The operator has depressed the
traveling pedal.)
The reel rotation switch is set to the
"Rotate" position.
However, when the reel reverse switch is
set to the "ON" position (reverse rotation),
the engine does not stop.
Warning Mechanisms
Caution
When the buzzer (intermittent tone) sounds,
be sure to stop operation since the engine is
overheated.
Do not stop the engine without idling. Allow
the engine to cool down, first.
Keep the engine idling for about 5 minutes
before stopping.
Remove dust that is jamming in the radiator,
air cleaner, and etc.
This machine features a warning mechanism
for overheating.
Overheat Warning Buzzer
If water temperature inside the engine
exceeds 105 °C (221 °F), a buzzer will
sound. (intermittent tone)
Remove the load from the engine, idle the
machine for five minutes, stop the engine,
and then inspect the machine and perform
any necessary maintenance.
1.
･
･
･
･
2.
･
･
1.
LM331
Description of Functions
Page 4-8
Instruments in the Meter Panel