Baroness LM285, Руководство по эксплуатации для владельца, Страница: 25 / 65

Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the oil cooler has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the radiator cover.
Loosen the knobs on the left and right of
the oil cooler, and then tilt the oil cooler.
2 1
37k9g1-001
Cleaning of Oil Cooler_001
1 Radiator
2 Oil cooler
Carefully clean the front and back of the oil
cooler with water or compressed air.
Hydraulic Oil
Inspection of Hydraulic Oil
Raise the mower units and maintain that
position on a level surface.
1.
2.
3.
1.
Make sure that the oil level is at the middle
of the oil gauge.
1
2
hmu8nk-003
Inspection of Hydraulic Oil_001
1 Oil gauge
2 Hydraulic tank
Check underneath the machine for oil
leakage.
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
If the oil level is low, open the tank cap and
supply oil.
1
k9yr5z-005
Hydraulic Oil Supply_001
1 Tank cap
Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
Move forward and reverse repeatedly
several times.
2.
3.
1.
2.
Han
dlin
g Instru
cti
ons
LM285
Handling Instructions
Page 4-5
Inspection Before Use