Baroness LM2700, Руководство по обслуживанию

Страница: 187 / 325

Normal operation is when there is
conduction between relay terminals 5 and 3
and no conduction between relay terminals
5 and 4.
1
1
3
4
5
2
4 5
2 3
y5n5dk-003
Inspection of CA1 Relay_002
Caution
Do not short-circuit the battery terminals.
Connect the battery (+) to relay terminal 2,
and the battery (-) to relay terminal 1.
Normal operation is when there is
conduction between relay terminals 5 and 4
and no conduction between relay terminals
5 and 3.
1
1
3
4
5
2
4 5
2 3
y5n5dk-004
Inspection of CA1 Relay_003
3.
4.
5.
General inspection and repair
Battery
Handling of the battery
For details on handling the battery, please refer
to the separate Battery Instruction Manual.
For safe use of the battery, observe the
following precautions:
Danger Danger
Do not use the battery near open flames or in
a poorly ventilated area. Keep the battery
away from lit cigarettes and other open
flames.
Do not short-circuit the battery.
If the positive and negative terminals are
connected to each other by a metallic tool,
the battery will short-circuit. And a short-
circuit will also occur if the positive terminal
contacts another metallic part (machine body
etc.).
Keep the battery away from open flames.
Hydrogen gas may be generated from the
battery. Improper handling of the battery
could cause a fire or explosion.
Danger Danger
Do not throw, drop, tilt or upset the battery, or
allow it to undergo physical impact.
Doing so could cause the electrolyte to leak.
If contact of the electrolyte with the eye, skin,
or clothing occurs, immediately wash it off
with plenty of water.
In particular, if eye contact or ingestion
occurs, immediately seek medical treatment.
If the electrolyte spills over the machine etc.,
wipe away with a wet cloth and flush the
affected area with plenty of water.
The electrolyte contained in the battery is
sulfuric acid.
Contact of the electrolyte (sulfuric acid) with
the skin could cause blindness or burns.
Contact of the electrolyte with the machine
etc. could cause damage to the machine.
1.
2.
Elec
trical sy
stem
LM2700
Electrical system
Page 6-39 General inspection and repair