Remove the drain plug while the engine oil is
warm, and then drain the engine oil into a
bowl.
Replace the drain plug in the engine.
Remove the oil level gauge.
Through the oil filling port, supply new
engine oil.
The engine oil quantity is approximately 0.56
dm
3
(0.56 L).
Position the machine so that the engine will
be level, then check the engine oil level
without screwing the oil level gauge into the
oil filling port.
1
2
bgmiun-019
Replacement of Engine Oil_001
1
Oil level gauge (Oil filling port)
2
Drain plug
After checking the oil level with the oil level
gauge, add more engine oil if it is insufficient.
Securely tighten the oil level gauge.
Check underneath the machine for oil
leakage.
Storage
Long-Term Storage
Follow the instructions below for long-term
storage of the machine.
Cleaning
Remove dirt, grass clippings, oil stains etc.
completely from the main vehicle and
engine.
Replacing oil
Inspect and replace the engine oil and
element.
Oil filling
Grease and lubricate the appropriate
points.
Fuel
Remove the fuel from the fuel tank.
2.
3.
4.
5.
6.
7.
8.
9.
1.
･
2.
･
3.
･
4.
･
Tire pneumatic pressure
Set the tire air pressure slightly higher
than normal, and then place the machine
on a board to avoid humidity.
Storage location
Cover the machine and store it in a dry
place where it will not be exposed to rain.
5.
･
6.
･
Maintenance
LM18GC
・
LM56GC / LM66TC
Maintenance
Page 6-25
Storage
