Tighten the bolt, washer, and nut at the left
side of the stand that were temporarily
secured.
Step:4
Step:3
1
4
2 3
y7fthb-002
Installing The Stand_002
1
Stand
2
Bolt
3
Washer
4
Nut
Confirmation of The Operation
Check that the brake operates completely.
Check that the engine clutch operates
completely.
If necessary, make adjustment.
Inspection and Cleaning
Inspect and clean the machine with the goals of
the followings.
Accident prevention
Failure prevention
Performance retention
Make efforts for early detection of the machine
failure and prevention of the sudden occurrence
of trouble.
Perform maintenance and repair works
immediately if any abnormality is found in the
machine.
Reel Cutter (Cutting Cylinder) and Bed
Knife (Bottom Blade)
Inspection of Reel Cutter (Cutting Cylinder) and
Bed Knife (Bottom Blade)
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
Check to see whether or not the edge of
the reel cutter (cutting cylinder) and the bed
knife (bottom blade) are too blunt to cut.
4.
1.
2.
3.
･
･
･
1.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
are not cracked.
Check to see how much the reel cutter
(cutting cylinder) and the bed knife (bottom
blade) are worn.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
have not changed color due to heat from
grinding.
Check to see whether or not the second
edge face (relief) remains at the point of
reel cutter (cutting cylinder).
Make sure that the welding between the
reel cutter (cutting cylinder) and the disc
has not come off.
Cover
Inspection of Covers
Warning
If you have removed the covers during
inspection, be sure to securely install them in
their original positions.
If a cover remains removed, the operator may
come into contact with rotating parts or belts
and foreign objects may fly off, possibly
resulting in injuries.
Make sure that there is no wear or
deterioration of the reel cover and all other
covers.
Make sure that there is no damage to the
reel cover and all other covers.
Make sure that there is no interference with
moving parts due to deformation of the reel
cover and all other covers.
Make sure that the reel cover and all other
covers are installed in their appropriate
positions.
Air Cleaner
Inspection of Air Cleaner
The air cleaner is a component that removes
dirt from the intake air to prevent wear of the
cylinder liners and piston rings so that the
engine will always operate smoothly.
A contaminated air cleaner element may
cause malfunction of the engine.
Make sure that there is no damage to the
air cleaner.
2.
3.
4.
5.
6.
1.
2.
3.
4.
1.
Handling Instructions
LM18GC
・
LM56GC / LM66TC
Handling Instructions
Page 5-3
Inspection and Cleaning
