Baroness LM180E, Руководство по эксплуатации для владельца

Страница: 48 / 72

Jacking Up The Machine
About Jacking Up The Machine
Warning
When replacing a tire or beginning any other
maintenance or repairs, be sure to chock the
wheels to prevent the machine from moving.
Before jacking up the machine, park it on a
hard, flat surface such as a concrete floor and
remove any obstacles that could prevent you
from performing the work safely.
When necessary, use an appropriate chain
block, hoist, or jack.
Support the machine securely with jack stands
or appropriate blocks.
Failure to do so may cause the machine to
move or fall, resulting in injury or death.
Important
Only place a jack under the jack-up points
specified.
Placing a jack at any other point will result in
damage to the frame or other parts.
Use the jack-up points identified in this manual
when jacking up the machine.
Jack-up Points
1 3
2
4 6
5
rwyt62-132
Jack-up Points_001
Jack-up Points
1 Front axle, center
2 Front axle, right
3 Front axle, left
4 Transmission case, lower
5 Transmission axle case, left
6 Transmission axle case, right
LM180E
Maintenance
Page 5-6
Jacking Up The Machine