Baroness GM1700, Руководство по эксплуатации для владельца

Страница: 79 / 87

1 O-ring
2 Element
3 Cup
4 Ring nut
Clean the inside of the filter cup with diesel
fuel.
Important
During installation, prevent contamination with
dirt or dust.
If the fuel is contaminated with dirt or dust
etc., the fuel injection pump and injection
nozzle will become worn.
Install a new fuel filter element, and then
correctly install all parts in their original
positions.
Fill up the fuel tank with fuel, and then open
the fuel cock.
1
2
A
B
3
3
kou8ls-003
Replacement of Fuel Filter Element_003
1 Fuel cock
2 Fuel filter
3 Air-bleeding plug
A ON (open)
B OFF (close)
Note:
Air bleeding is not required since it occurs
automatically.
3.
4.
5.
Change of Transmission Oil
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
When you change the transmission oil, be
sure to drain it into a bowl and discard it in
accordance with regional laws and
regulations.
Important
Be sure to pour automobile gear oil that is
classified as SAE Viscosity Grade #90 into the
transmission.
Change the entire transmission oil after 50
hours of operation for the first time, and then
change it every year.
Transmission oil quantity is 0.45 dm
3
(0.45
L).
1
2
g98iis-001
Change of Transmission Oil_001
1 Oil filling port
2 Drain plug
Make sure that oil does not bleed from
mating areas of the gear box.
Check underneath the machine for oil
leakage.
1.
2.
3.
Maintenance
GM1700
Maintenance
Page 5-21
Maintenance Work