Baroness GM1700, Руководство по эксплуатации для владельца

Страница: 37 / 87

Supply of Engine Oil
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
If the engine oil level is lower than the lower
limit line on the oil level gauge, supply
engine oil through the oil filling port.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Re-place the oil filler cap.
1
kx9ti-003
Supply of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
1.
2.
3.
Fuel
Inspection of Fuel Quantity
Position the machine so it is level, and then
observe the fuel gauge located on the fuel
tank to check the fuel level.
1
guc5f6-006
Inspection of Fuel Quantity_001
1 Fuel gauge
Fuel Supply
Warning
Do not supply fuel above F (FULL) level of the
fuel gauge.
If you supply too much fuel, it might overflow
from the fuel cap when you travel or work on a
slope.
Warning
Keep fire away while refueling.
Do not smoke while refueling.
If the fuel gauge located on the fuel tank
indicates a level close to E (EMPTY), supply
fuel (diesel) at your earliest convenience.
The fuel tank capacity is approximately 23.0
dm
3
(23.0 L).
2
1
3
2e4emp-002
Fuel Supply_001
Handling Instructions
GM1700
Handling Instructions
Page 4-9
Inspections