Baroness FS900, Руководство по обслуживанию, Страница: 120 / 163

Maintenance
About Maintenance
This chapter provides descriptions of the main
inspection and maintenance procedures for the
FS900 work machine.
For information on daily checks, maintenance
and handling of the machine, please refer to
the separate FS900 Owner's Operating Manual
and Parts Catalog.
For information on attaching and removing
optional parts and attachments, refer to the
handling instructions for the corresponding
attachment.
Specifications
Grease
Use the following type of grease on the
operating machine and mower units.
Grease Excelite EP No. 2 (urea base)
Adjusted Value
Adjustment of
brushes
Gap between brush and frame 5 mm 0.197 in
Adjustment of rotary
plates
Gap between rotary plate and frame 5 mm 0.197 in
Adjustment of belt
tension
Brush belt
The V-belt should slack by
approximately 10 mm when you press
the middle of the belt with your finger at
98 N (10 kgf).
Adjustment of bucket
Gap between operating machine and
bucket contact surface
10 mm 0.393 in
Adjustment of bucket
lid
Gap between bucket and lower area
of lid
1 mm 0.039 in
Screwing distance of rod end and
piston rod
20 mm 0.787 in
FS900
Operating Machine and Mower Units
Page 7-2
Maintenance