LPA
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
2
20070125 REV 1 - 10/18
6. Secure to ceiling with steel wires attached to earthquake clips.
7. If dimming control device is used, run low voltage control wires into the driver junction box.
Wiring Connections
Electrical connections should be made inside driver housing.
a. Remove screw and open cover.
b. Connect the line fixture lead to the black supply lead.
c. Connect the common fixture lead to the white supply lead
d. Connect the ground lead from the service to the green grounding screw or to the ground lead coming
from the housing.
e. If dimming wires are not used, make sure they are capped.
f. Close cover and secure with the screw.
This fixture auto adjust for voltages between 120VAC - 277VAC
Wiring Diagram.
