2.
Place the EASYpure RO on the
Bench Stand so that the screw holes
where the feet were attached line up
with the holes in the Bench Stand.
3.
Install the 4 screws removed in step 1
through the bottom of the Bench
Stand and into the EASYpure RO.
4.
Install the accessory 30 Liter
Reservoir according to the instruc-
tions in the accessory 30 Liter
Reservoir manual.
Wall Mounting
Wall composition and construction, as well as
fastener type, must be considered when
mounting this unit. The mounting surface and
fasteners selected must be capable of sup-
porting a minimum of 120 lbs.; inadequate
support and/or fasteners may result in dam-
age to mounting surface and/or equipment.
If you are wall mounting the EASYpure RO
using the optional wall mounting bracket,
mount the unit as follows:
Wall Mounting the EASYpure RO
1.
Install the wall bracket (Part Number
D7384) on the wall in a location that
is accessible to water, power and an
atmospherically vented drain, and that
is convenient to use. A minimum of 4
fasteners must be used.
2.
Remove the 4 feet from the
EASYpure RO. Retain the screws.
9
I
NSTALLATION
Warning
If you are unsure of mounting surface
composition, condition and construc-
tion, or correct fasteners, consult your
building maintenance group or
contractor.
Do not mount the EASYpure RO
directly over equipment that requires
electrical service. Routine mainte-
nance of this unit may involve water
spillage and subsequent electrical
shock hazard if improperly located.
Note
If you are bench mounting proceed to
“Utility Connections.”
