Locating your EASYpure RO
Your EASYpure RO must be located within six
feet of an electrical outlet appropriate for your
unit, within five feet of your feedwater supply
and close to an atmospherically vented drain. If
you are using the accessory 30 Liter Reservoir
(Part Number TY742X2A), the tank overflow on
the EASYpure RO's integral 6.5 liter tank should
be located below the level of the storage reser-
voir's overflow. This will ensure that the
EASYpure RO's internal float switches will con-
trol the operation of the system. If the
EASYpure RO is to be used with the accessory
30 Liter Reservoir, the reservoir must not be
mounted farther than 4 feet away from the
EASYpure RO. The EASYpure RO Bench Stand
(Part Number D7424) will be required for a
bench mounted installation with an accessory
30 Liter Reservoir.
Bench Mounting
If you are bench mounting the EASYpure RO
without the accessory 30 Liter Reservoir (Part
Number TY742X2A), simply place the
EASYpure RO on a bench.
If you are bench mounting the EASYpure RO
and using it in conjunction with the accessory
30 Liter Reservoir (Part Number TY742X2A),
the EASYpure RO Bench Stand (Part Number
D7424) must be added to the EASYpure RO to
ensure automatic operation. Install the
EASYpure RO Bench Stand as follows:
1.
Remove the 4 feet from the EASYpure
RO and retain the screws.
8
Installation
Warning
Do not mount the EASYpure RO
directly over equipment that requires
electrical service. Routine mainte-
nance of this unit may involve water
spillage and subsequent electrical
shock hazard if improperly located.
Figure 1: EASYpure RO.
