3.
Place the EASYpure RO on the wall
bracket swivel base so that the screw
holes where the feet were attached line
up with the holes in the wall bracket.
There are guides on the wall bracket
that will mate with the EASYpure RO.
4.
Install the four screws removed in step
2 through the bottom of the wall bracket
and into the EASYpure RO.
Utility Connections
The EASYpure RO is supplied with four sepa-
rate lengths of tubing to be used for feedwater,
reject water, feed to accessory storage reservoir
and feed to another EASYpure unit's connec-
tions. Each length of tubing is six feet long and
has the necessary fittings installed.
Feedwater Connection
1.
Locate the length of 3/8" O.D. tubing
provided with a quick disconnect insert
on one end and a 3/8" O.D. X 1/4 NPT
tubing adapter on the other.
2.
Insert the quick disconnect insert into
the feedwater inlet on the EASYpure
RO. (See Figure 3 for location.) Install
the tubing adapter onto your incoming
water line. We recommend a customer
supplied shut off valve be installed in
your feed water line.
10
I
NSTALLATION
Note
We recommend a customer supplied
shut off valve be installed in your feed
water line.
Note
The quick disconnect fittings have
built-in shutoff valves in both the cou-
pling and the insert.
Figure 2: Wall Mounting the EASYpure RO.
