9
Siting
Move the still evaporator to the operating location
and install the evaporator so that it is level and
plumb.
Accessories
All operating and convenience accessories
purchased with the still should be installed after
the still has been assembled on its mounting and
before connecting the service lines to the still.
Plumbing Connections
Ensure that all fittings are tight in the still and still
accessory piping and connect the water and
waste service to the still as shown in the installa-
tion diagram.
Installation
Bench Dimensions in Inches
Electric Heat
Still Cap (GPH)
1
2
5
10
Dimension A*
20
35
45
58
Dimension B
22
23
35
43
Dimension C
10
11
14
14
Figure 2
Top View
* Overall height includes enough
clearance to facilitate condenser
removal.
Note
The still is not designed to sup-
port the service piping. Ensure
that the service piping is ade-
quately supported. If no control
valves were purchased with the
still, a shutoff valve and throt-
tling valve should be installed in
the cooling water supply line,
just before the still.
