Quick Install Guide Version 1.2
Low Cost IP Automation
Controller with Modbus/TCP
and SNMP Support
Package contents
a Barionet 50
b This quick install guide
Mounting, Wiring and Setup
Slide the device upwards onto the DIN rail. Push it up and towards the rail
until it snaps onto the upper rail edge.
For wiring information please refer to the second page.
Before powering the device please read the user manual available on
www.barix.com.
Support
For support please contact your local dealer or visit www.barix.com.
© 2010 Barix AG , all rights reserved. All information is subject to change
without notice. All mentioned trademarks belong to their respective owners
and are used for reference only. Quick Install Guide V1.2 March 2010
B A R I O N E T
5 0
