background image

54

19 Warranty

EN-IST-B935-0720

19 Warranty

1. VALIDITY

Bardiani Valvole‘s Products are manufactured in compliance with the technical specifications laid out in 

their “Instruction, Use and Maintenance Manual” and are fully compliant with the directives specifically 

mentioned in these manuals.

Bardiani Valvole S.p.A. guarantees its own Products against any design and/or construction and/or 

material defects and/or faults for a period of 12 (twelve) months from the date of delivery.

Notification of any Product defects and/or faults must be sent in writing to Bardiani Valvole S.p.A. within 

8 (eight) days from their detection, providing adequate documentation of the defect/fault encountered as 

evidence.

Services provided in the warranty period shall not result in an extension of the warranty beyond the 

stipulated 12 (twelve)-month period, as this warranty validity period is to be considered mandatory.

2.   CONTENTS OF THE WARRANTY

Notwithstanding and without prejudice to the rights of the Buyer, which may be acknowledged by 

applicable law, this warranty it to be intended as limited, at the discretion of Bardiani Valvole S.p.A., to 

the repair and/or replacement of the Product and/or part of the Product and/or its components which 

is/are found to be defective due to design and/or manufacturing and/or material faults.

In the event of repair and/or replacement of the Product and/or any one of its parts and/or components, 

any returned item/s shall become the property of Bardiani Valvole S.p.A. and the relative shipping costs 

shall charged to Bardiani Valvole S.p.A.

Bardiani Valvole S.p.A., shall be under no obligation to compensate for any immaterial and/or indirect 

damages and shall in no way be held liable for consequential damages and/or losses, such as (by way 

of example only), damages due to loss of business, contracts, opportunities, time, production, profits, 

goodwill, image etc.

No retailer or distributor or dealer or agent or representative or employee or person appointed by 

Bardiani Valvole S.p.A. is authorized to make any amendments and/or integrations and/or extensions to 
this warranty.

3.   WARRANTY EXCLUSIONS

 

-

Elastomers and electrical components are expressly excluded from this warranty.

 

-

This warranty does not cover design faults emerging whenever a Product is manufactured by Bardiani 

Valvole S.p.A. based on designs and/or technical specifications provided by the Buyer.

 

-

Moreover this warranty excludes the following:

 

-

faults and/or defects resulting from incorrect and/or unsuitable and/or inadequate transportation of 

the Product;

 

-

faults and/or defects resulting from failure to comply with the indications laid out in the “Instruction, 

Use and Maintenance Manual” with regards to installation of the Product or in any event caused by 

incorrect and/or unsuitable and/or improper installation;

 

-

faults and/or defects resulting from failure to comply with indications laid out in the “Instruction, 

Use and Maintenance Manual” with regards to use and/or maintenance operations and/or storage 

of the Product or in any event caused by incorrect and/or unsuitable and/or improper use and/or 

maintenance operations and/or storage;

 

-

faults and/or defects due to normal wear and tear of the Product and/or its parts and/or its components; 

 

-

faults and/or defects in the Product and/or its parts and/or its components for work and/or repairs 

being carried out by unskilled staff or staff that has not been authorised by Bardiani Valvole S.p.A.;

 

-

faults and/or defects in the Product and/or its parts and/or its components caused by its being dropped 

and/or banged and/or dented and/or misused and/or tampering and/or breakage and/or accidents 

and/or any other event caused by negligence and/or carelessness and/or neglect by the Buyer and in 

general for any causes not ascribable to design and/or manufacturing and/or material defects;

 

-

faults and/or defects in the Product and/or its parts and/or its components caused by other events 

beyond the control of Bardiani Valvole S.p.A., such as force majeure or unforseeable circumstances.

Содержание B935



























































Отзывы: