Bardiani Valvole BBZPPG, Инструкция по эксплуатации и обслуживанию, Страница: 9 / 67

9
2 Safety
EN-IST-BBZPPG-0423
2 Safety
2.1 General safety warnings
Intended use
Bardiani valves have been exclusively for moving fluids.
Prohibited use
The valve must not be used:
• for any operations different to those described under the heading “Intended Use”,
• for handling fluids different to the type specified by the manufacturerand indicated in the valve's
technical data.
• for moving fluids at different pressures to those envisaged by the manufacturer and indicated in the
valve's technical data.
Limitations on valve use
It is forbidden to:
• use the valve in a construction configuration different to the one envisaged by the manufacturer.
• use the valve where there is a risk of explosion and/or fire, unless envisaged by the manufacturer (if
the valves are certified in accordance with Directive 2014/34/EU, please refer to the ATEX Manual)-;
• integrate other systems and/or equipment which were not considered by the manufacturer during the
executive design phase,
• use the valve for purposes other than those specifically envisaged by the manufacturer.
WARNING
The machine may not he used inside premises where there is a potentially explosive atmosphere or
risk of ire unless otherwise stated by the manufacturer (in the case of valves certiied in accordance
with Directive 2014/34/EU please refer to the ATEX Manual).
BARDIANI VALVOLE S.p.A. declines all liability
for installation, use or maintenance which fails to comply with
the indications provided in this manual!
2.2 Electrical device
(see the control unit manual)