manualshive.com logo in svg

Bardiani Valvole BBWK1, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Bardiani Valvole BBWK1 Скачать руководство пользователя страница 28

28

8 Cleaning

EN-IST-BBZK-0821

Risk of 

stainless steel 

corrosion

Risk of damage

     elastomers

8 Cleaning

 

 

1. VALVE CLEANING WITH DETERGENTS:

The system in which the valve is installed must be cleaned by expert 
personnel in observance of the following:

 

-

Abide by the indicated detergent concentration values;

 

-

Observe the instructions provided by the detergent manufacturer.

 

-

Always wear protective safety glasses and gloves.

IMPORTANT!

 

-

Accurately dose detergents to avoid excessive concentration;

 

-

Always rinse thoroughly with clean water after washing.

 

-

Check compatibility of valve materials.

WARNING!

Burns hazard. The valves and piping may be very hot. Wear protective 
gloves

CAUTION

After installing a new or serviced valve, perform an internal washing 
cycle before using the piping for food liquids. If it there has been any 
welding work, passivation treatment must be carried out.

EXAMPLE OF INTERNAL WASHING CYCLE (CIP)

Phases

Temperature °C

Washing product

Initial rinse

Environment

Chlorine- and chloride-free 

water

Washing

70 °C

Caustic soda (NaOH) at 1%

Intermediate rinse

Environment

Chlorine- and chloride-free 

water

Washing

70 °C

Nitric acid (HNO3) at 0.5%

End rinse

Environment

Chlorine- and chloride-free 

water

Recommended washing product velocity = 2m/s

Содержание BBWK1

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды