Barco XLM H25, Руководство пользователя

Страница: 33 / 111

3. Connections
3.3.6 YUV / RG(s)B input module
Technical info:
• Component Video (BNC)
- R-Y : 0,7Vpp ±3dB 75 Ohm termination.
- Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.
- B-Y : 0,7Vpp ±3dB 75 Ohm termination.
• RG(s)B (BNC)
- R : 0,7Vpp ±3dB 75 Ohm termination.
- G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
- B : 0,7Vpp ±3dB 75 Ohm termination.
• 3 BNC’s loop through connectors.
• Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection.
• When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges
the module.
D320 YUV/RGSB
IN OUT
Image 3-11
Image 3-12
Order info:
Article No. Description
R9850940 D325Digitizer YUV / RG(s)B input module
3.3.7 RGB analog input module
Technical info:
• Sub D15 connector for input and loop through.
• R, G, B, Hsync, Vsync : 0 to 1 Vpp ±3dB 75 Ohm termination.
• Black level : 300mV.
• Sync-tip : 0V
• Resolution : SXGA and UXGA version available.
• Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection.
• When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledges
the module.
D320 RGB-AN
IN OUT
Image 3-13
Image 3-14
R5976690 XLM H25 03/09/2004 29