Barco XHD-404, Руководство пользователя

Страница: 278 / 287

Remedy Possible cause Problem
Make sure that the cable is seated
correctly and that the thumb-
screws are tight. The connections may be incorrect.
Bad output on a
specific channel
Be sure not to exceed maximum
cable length. The suggested cable length has
been exceeded.
Be sure to use the supplied con-
verters. (See Note #2 to
Table 2.1,
“Box content” .) Swap the converter
for a converter with a known good
output.
The converters are unsupported.
Make sure that the cable is seated
correctly and that the thumb-
screws are tight.
Swap the cable for a known good
cable. A connection or cable is bad.
Bad input on a
specific channel
Be sure not to exceed maximum
cable length. The suggested cable length has
been exceeded.
Be sure to use the supplied con-
verters. (See Note #2 to
Table 2.1,
“Box content” .) Swap the converter
for a converter with a known good
output.
The converters are unsupported.
• Be sure to use specified video
input formats. See the
Supported
3D, audio, image, and video formats
(p.255)
section of this user guide.
• To check the DVI inputs, use the
Vision window application in-
stalled on the server. See the
DVI
video input check (p.239) section of
this user guide.
• To check the SDI inputs, use the
dREC application installed on the
server. See the
SDI video input
check (p.240)
section of this user
guide.
The input format is unsupported.
275 Barco Pn: 60600320
Barco Media Server XHD-Series User Guide Appendix J: Trouble shooting