Barco XDM, Руководство по установке

Страница: 36 / 104

R5914477 /00 XDM 36
3.4 Projector configurations
The different configurations
The projector can be installed on a table or be hung from a truss beam, and this in a front projection or rear
projection configuration. This can happen as long as the projector is not hung upside down (the top cover can
not face downward). Depending on the physical configuration of the projector and the used lens (e. g. UST
lenses), the projected image may have to be flipped horizontally and/or vertically.
The projected image can be adapted via the menu: Configuration > Projector > Image orientation .
Front projection
The projector is installed, either on a table or hanging from a truss beam, at the same side of the audience.
S
C
TH
Image 3 – 10 Examples of Front projection
TH Theater (Audience area)
SC Screen
Rear projection
The projector is installed, either in on a table or hanging from a truss beam, at the other side of the screen,
opposite to the audience.
S
C
TH BA
Image 3 – 11 Examples of Rear projection
SC Screen
TH Theater (Audience area)
BA Backstage area
Installation preparations