Barco XDL, Руководство по установке

Страница: 66 / 88

R5906150 /05 XDL 66
2. Release the 3 captive screws of the input module (4). 4
4
Image 5 – 34
3. Pull out the input module of the Input & Communication module using the handles.
Image 5 – 35
CAUTION: Ensure that unused input slots of the Input & Communication Unit are always covered
with a dummy front plate. After removing one of the input modules, immediately replace with an
other one or install a dummy front plate on the unused input slot.
5.20 Software update
CAUTION: Do not power off or unplug the projector while the software update is ongoing.
How to update the software
1. Power on the projector. Wait until the Power on/off button is lit white or blue.
2. Download and install the latest version of Projector Toolset for Pulse. The program can be downloaded for
free from Barco's website, (URL:
http://www.barco.com ). Click on myBarco and log in to get access to
secured information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. With the created login
and password, it is possible to log in where you can download the software.
3. Download the latest firmware (format .fw) from Barco's website in the same way as for Projector Toolset.
4. Start Projector Toolset and make a connection with the projector. For more information, see the “ Projector
Toolset ” user guide.
5. Select tab Update settings .
Installation procedures
4. Depending on the production date of the projector, the captive screws can either be Phillips screws or Torx screws. Refer to the tools
list to see what tool you may require.