Barco XDL, Руководство по установке

Страница: 41 / 88

41 R5906150 /05 XDL
How to shift the Lens Holder?
1. Open the projector front cover. See “ Opening the front and rear cover doors ” , page 76 .
2. Loosen the 4 screws (1) until the central part of the Lens Holder becomes loose. Use a 3 mm Allen
wrench.
3. Shift the central part up or down as desired. The lowermost, middle and uppermost shift positions are
marked on the Lens Holder with a little arrow (2).
4. Tighten the 4 screws (1) to a torque of 8.4 Nm .
2 2
1
Image 4 – 9
5. Close the front projector cover again.
4.6 Available lenses
Which lenses are available for my projector?
The table below is subject to changes and was last updated on 20/02/2018. Consult Barco's web
site for the most recent information about available lenses.
Order No
Type Throw Range (4K)
R9852945 XLD 0.75
R9852950 XLD 1.0
R9852090 XLD 1.45 - 1.8
R9852092 XLD 1.8 - 2.4
R9852094 XLD 2.2 - 3
R9852100 XLD 2.8 - 5.5
R9852920 XLD 5.5 - 8.5
R9856506
HB
1.13 - 1.72
R9856294 HB 1.35 - 1.86
R9856297 HB 1.46 - 2.10
Installation preparations