Barco XDL Series Скачать руководство пользователя страница 113

Страница: 113 / 156

R5906150 /02

XDL

113

Image 10-9

The

Test pattern

menu opens on the LCD display.

Use the arrow keys to select the desired test pattern.

10.7 Software update

CAUTION:

Make sure not to power off or unplug the projector while the software update is going on.

How to update the software

Power on the projector. Wait until the

Power on/off

button is lit white or blue.

Download and install the latest version of Projector Toolset for Pulse. The program can be downloaded for free
from Barco's website, (URL:

http://www.barco.com

). Click on

myBarco

and log n to get access to secured

information. Registration is necessary.

If you are not yet registered, click on

New to myBarco

and follow the instructions. With the created login and

password, it is possible to log in where you can download the software.

Download the latest firmware (format .fw) from Barco's website in the same way as for Projector Toolset.

Start Projector Toolset and make a connection with the projector. For more information, see the Projector
Toolset user guide.

Select tab

Update settings

Fill out the path to the update file (1)

Getting Started

Содержание XDL Series





























































































































































Результаты поиска

Содержание XDL Series

Отзывы:

Barco XDL Series, Руководство по установке, Страница: 113 / 156

Результаты поиска

Содержание XDL Series

Отзывы: