Barco Wodan, Руководство пользователя

Страница: 45 / 94

6. Basic operations
Image 6-3
Select Source
2. Press OK .
The Select Source menu is displayed with the actual available sources fi lled out, including all available stitched layout options.
Image 6-4
Input selection menu
3. Select the desired stitched input.
Tip: If the V&AR board is installed, scroll all the way down the Input Selection menu for the stitched options on that board.
Image 6-5
Input Selection menu, stitched options
6.3 Connector Settings
About Connector Settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display Identi fi cation Data (EDID).
When entering the menu for each input connector, you can change the following:
• Color Space
• Signal Range
• EDID
How to con fi gure a connector
1. Press Menu to activate the menus and select Source .
R5906102 WODAN 10/04/2018 41