R5906125 /00
External Laser Cooler Module
14
1
1
Image 1-16: Left: Male hose connection, right: Female hose connection
3.
Connect the communication and power cable (reference 2, Image 1-15) on the cooler with the same port on
the projector. Use a long power and communication cable for this.
Tip:
Guide the long communication cable together with the hoses.
1.5 Setting up the external cooler
Using the external cooler
When the external cooler for the projector is correctly installed, the Cooling menu will be enabled and visible in
the menu.
Using the Cooling menu, you can choose between the following cooling methods:
•
Internal
: Use only the internal cooling system of the projector (default).
•
External
: Use only the external cooling system of the projector. This method is preferred when the cooler
is in a different location than the projector and you want the projector to operate in
“
silent mode
”
.
•
Mixed
: Use both the external and internal cooling. Can be used to extend the lifetime of the internal cooler
of the projector.
How to set up the external cooler
1.
In the main menu, select
Installation
→
Illumination
→
Cooling
.
Image 1-17: Illumination menu, Cooling
The Cooling menu is displayed.
Image 1-18: Cooling menu
