Barco UDX 4K32, Руководство пользователя

Страница: 45 / 82

7. GUI – Image
How to set the P7 desired values
1. In the main menu, select Image → Advanced → P7 Realcolor .
Image 7-7
Advanced menu — P7 Realcolor
The P7 menu is displayed.
Image 7-8
P7 Realcolor menu
2. Select the desired Mode . Choose one of the following:
- Native : Default mode, with default values. All other options in the P7 menu are disabled.
- Custom RGB : 3–point color con fi guration. In RGB mode, the C, M and Y coordinates will be calculated automatically based
on the R, G and B coordinates.
- Custom RGBCMY : 6–point color con fi guration (both RGB and CMY). In RGBCMY mode, each color can be given a speci fi c
coordinate within the measured color triangle.
- Custom WHITE : Con fi gure only the White temperature.
3. De fi ne the coordinates for each available color.
Click on a coordinate value and select the current value. Enter the desired value with the numeric keys.
Note: You can only pick coordinates within the measured color triangle.
4. For Custom White , click on White point and choose one of the following:
- Coordinates : Con fi gure the white point via speci fi c coordinates. The white point is speci fi ed using an x, y coordinate in the
CIE 1931 Chart.
- Temperature : Con fi gure the white point via a color temperature slider. The white point is speci fi ed on a Kelvin scale between
3200K and 13000K tracking along the black body curve.
You can reset all coordinates to the default values (to native) by selecting Reset modes to native. Press OK
button to reset.
7.3 Setting the output resolution
This menu is only available on the 4k models, with an actuator included.
How to choose the output resolution
1. In the main menu, select Image → Advanced → Output resolution .
R5906112 UDX SERIES 24/05/2017 41