Barco UDM 4K15 Скачать руководство пользователя

Страница: 25 / 220

R5911443 /08

UDM

Warning:

Never switch on the projector if the

OVERVOLTAGE

status light lit up. Neglecting will

cause irreversible damage to the projector.

► If no,

proceed with the next step.

Press the mains switch (reference 2) to switch on this projector.

OVERVOL

TAGE

Image 2–6

•

When '0' is pressed, the projector is switched off.

•

When 'I' is pressed, the projector is switched on.

The projector starts up to ready mode. The

Power on/off

button will blink until ready mode is achieved.

Once in ready mode, the Power on/off button will be lit WHITE.

The start up screen is displayed on the touch panel.

Image 2–7

Press the

Power on/off

button on the projector, or the

Power On

button on the remote control.

The projector will continue to power on mode. The

Power on/off

button will blink until the projector is

ready. Once the projector is ready, the Power button will be lit BLUE.

Image 2–8

The background image of the startup screen and info screens can be changed with Projector
Toolset with an installed UDM plug-in.

2.3 Start image projection

Connect the source

Connect the source cable with the appropriate input port on the Input & Communication module.

Tip:

See chapter

“Input & Communication”, page 37

, for more info about supported input formats.

Getting Started

Содержание UDM 4K15





























































































































































































































Результаты поиска

Содержание UDM 4K15

Отзывы:

Похожие инструкции для UDM 4K15

Бренды по названию

Популярные бренды

Barco UDM 4K15, Руководство пользователя

Результаты поиска

Содержание UDM 4K15

Отзывы:

Похожие инструкции для UDM 4K15

Бренды по названию

Популярные бренды