Barco TransForm SCN, Руководство пользователя

Страница: 60 / 61

8. Trouble shooting
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
8-2
8.1 Errors
8.1.1 General errors
Error Applies when … / Action to be taken …
The looped through image on the monitor shows dis-
turbances If the host PC generates analog graphical output but a
digital display is connected to the loop through con-
nector, then the settings as entered under
Maximum
DDC Timing are used, please check that these settings
are correctly set. (section 4.3.7 Encoder settings – timing )