Barco TransForm SCN, Руководство пользователя

Страница: 56 / 61

7. Technical appendix
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
7-4
7.2 Interfaces
Seen from outside T
RANS
F
ORM
SCN
DVI connector - digital and analog in
8 16
C4
C2
C3
C1
C5
17
1
24
9
C2 analog green C4 analog HSync
C1 analog red
C5 analog ground
(analog R, G, & B return)
C3 analog Blue
8 analog Vsync 16 hot plug detect 24 RMDS clock-
7 DDC serial data 15 ground (return for +5V,
Hsync, and Vsync) 23 RMDS clock+
6 DDC serial clock 14 +5V power 22 RMDS clock shield
5 not connected 13 not connected 21 not connected
4 not connected 12 not connected 20 not connected
3 RMDS data2 shield 11 RMDS data1 shield 19 RMDS data0 shield
2 RMDS data2+ 10 RMDS data1+ 18 RMDS data0+
1 RMDS data2- 9 RMDS data1- 17 RMDS data0-
Figure 7-1
DVI-I in connector – pin assignment
DVI connector – digital and analog loop-through
8 16
C4
C2
C3
C1
C5
17
1
24
9
C2 analog green C4 analog HSync
C1 analog red
C5 analog ground
C3 analog blue
8 analog Vsync 16 hot plug detect 24 TMDS clock-
7 DDC serial data 15 ground 23 TMDS clock+
6 DDC serial clock 14 + 5V power 22 TMDS clock shield
5 not connected 13 not connected 21 not connected
4 not connected 12 not connected 20 not connected
3 TMDS data2 shield 11 TMDS data1 shield 19 TMDS data0 shield
2 TMDS data2+ 10 TMDS data1+ 18 TMDS data0+
1 TMDS data2- 9 TMDS data1- 17 TMDS data0-
Figure 7-2
DVI-I in connector – pin assignment