Barco TransForm SCN, Руководство пользователя

Страница: 31 / 61

4. Operating
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
4-8
4.3.4 Network settings
Within network settings the settings for the network connection of T
RANS
F
ORM
SCN are configured.
Fast interface settings
The fast interface settings screen serves to configure and view network settings of the T
RANS
F
ORM
SCN.
MAC address
MAC address of the device
IP origin
static or DHCP
IP address
IP address of the T
RANS
F
ORM
SCN; only selectable, if DHCP is disabled
IP subnet mask
IP subnet mask of the T
RANS
F
ORM
SCN; only selectable, if DHCP is disabled
Route
IP default gateway T
RANS
F
ORM
SCN uses in case that DHCP is disabled
DHCP
Enabled or Disabled .
If enabled, DHCP is used to assign an IP address to T
RANS
F
ORM
SCN.
It is advisable to enable DHCP, if a DHCP server is used within the network.
IGMP version
Shows the IGMP version used in the network; IGMP v1, IGMP v2 and IGMP v3 is
possible
Figure 4-6
T
RANS
F
ORM
SCN web interface – Network – Fast interface settings in administration (left) and standard user (right) mode