![background image](http://html1.mh-extra.com/html/barco/transform-scn/transform-scn_user-manual_3895215029.webp)
4. Operating
Barco – TransForm SCN – R5976968 – Revision 01 – May 2006
________________________________________________________________________________________________
4-6
4.3
TransForm SCN web interface
The T
RANS
F
ORM
SCN offers via the LAN a web based graphical user interface. It provides access to configuration
parameters and operation of T
RANS
F
ORM
SCN. The software can be accessed from any PC within the same network
allowing maximal flexibility in control.
4.3.1
Starting the TransForm SCN web interface
The graphical user interface of the configuration software of T
RANS
F
ORM
SCN is automatically started, when calling
its IP address via http. Therefore please follow the steps below:
•
On a computer which is connected to the same network as the T
RANS
F
ORM
SCN open a web-browser.
•
Make sure, that the usage of cookies is enabled for the web content zone of the T
RANS
F
ORM
SCN.
•
Into the address bar of the browser enter the IP address of the T
RANS
F
ORM
SCN, e.g.:
http://192.168.180.14
The browser will display the configuration software.
4.3.2
Structure of the TransForm SCN web interface
When the T
RANS
F
ORM
SCN web interface has started, its home page can be seen. On the left hand side there is a
navigation-menu, which provides access to the different kind of settings of T
RANS
F
ORM
SCN. Each section can be
accessed on an individual page. The meaning of the entries on these pages is explained below.
The web interface can be used in two different modes:
standard user mode
and
administration mode
. De-
pending on this mode the menu as well as the possibility to configure settings on the respective pages differs.
The mode can be switched by logging in or out, please refer to section
4.3.15 Administration login/logout
. At the
bottom of some screens there is an
Update
button. Press it when you are sure about your changes to transmit
them to the T
RANS
F
ORM
SCN.
In the following sections the user interface is general shown as it would appear in administration mode, if noth-
ing special is mentioned. If there are decisive differences between the two modes, you will find a note or addi-
tional screenshots of the web interface in user mode.
Figure 4-4
T
RANS
F
ORM
SCN web interface – home
Содержание TransForm SCN
Страница 1: ...User s manual TransForm SCN...