Barco Thor Series Скачать руководство пользователя страница 103

Страница: 103 / 182

R5906788-03

Thor series

103

9.16 Installing a HDD into the ICMP

This procedure assumes that the HDD slot of the ICMP is empty. If not, see procedure

CAUTION:

Always use a new empty spare part HDD approved by Barco to replace a malfunction

HDD. Do not use a HDD from another ICMP HDD set.

CAUTION:

Always make sure that all HDDs in the ICMP HDD set have the same storage capacity.

See label on top of the HDD to know the storage capacity.

How to install a HDD ?

Ensure that the projector is switched off.

Prepare the HDD for insertion by moving the latch towards the left and push the unlock button to open the
handle.

Image 9-18

Insert the HDD into the HDD slot. Ensure that the handle is sufficiently open so that the hook (reference 1) of
the handle can pass the front plate of the ICMP.

Image 9-19

Push the HDD completely and firmly inside its slot, close the handle, and move the latch towards the right.

ICMP

Содержание Thor Series























































































































































































Результаты поиска

Содержание Thor Series

Отзывы:

Barco Thor Series, Руководство по установке, Страница: 103 / 182

Результаты поиска

Содержание Thor Series

Отзывы: