Barco Thor Series, Руководство пользователя

Страница: 26 / 98

R5906787 /04 Thor series 26
If no lens is installed the lasers of the Thor series projector can not be powered. The Standby button
en Light button will light up red. The Projector Toolset will also show the error message that there is
no lens installed.
3.5 Lens shift, zoom & focus
Motorized lens adjustment
The Thor is equipped with a motorized lens shift and zoom & focus functionality.
Maximum shift range
The lens can be shifted with respect to the internal optics of the projector (DMD) which results in a shifted
image on the screen (Off-Axis). A 100% shift means that the centre point of the projected image is shifted by
half the screen size. In other words, the centre point of the projected image falls together with the outline of the
image in an On-Axis projection. Due to mechanical and optical limitations the shift range is limited as well.
All DC4K lenses have a shift range of 50% up, 50% down, 17% left, and 17% right. This range is valid for all
throw ratios. Within these shift ranges the projector and lens perform excellently. Configuring the projector
outside these shift ranges will result in a slight decline of image quality.
U
D
SIDE VIEW
P
F
TOP VIEW
P
F
L
R
+50%
-50%
-17%
+17%
U
D
L R
P
F
+50%
-50%
-17% +17%
Image 3-6
P DMD.
F Field of view.
It ’ s mechanical possible to shift outside the recommended field of view, but this will result in a
decline of image quality depending on the used lens and the zoom position of the used lens.
Furthermore, shifting too much in both directions will result in a blurred image corner.
How to shift the lens of the Thor ?
1. Use the up and down arrow buttons on the Local Keypad to shift the lens vertically and use the left and
right arrow buttons on the Local Keypad to shift the lens horizontally .
SHIFT
Image 3-7
How to zoom in or out?
1. Use the “ + ” and “ - ” zoom buttons on the Local Keypad to zoom in or out.
Lenses & Lens selection