Barco SIM 5W Скачать руководство пользователя страница 184

Страница: 184 / 195

7. Advanced

Image 7-240
Press the double right arrow key until the dimmer appears on the bottom edge of the screen

7. Use the

ne adjustment buttons to move the dimmer back until it is just no longer visible on the full white pattern.

Image 7-241
Use the

ne adjustment buttons to move the dimmer back until it is no longer visible

This is the correct reference position for Dimmer 2.

8. Press

BACK

to return to the

Lamp

menu.

The new Dimmer Reference Points are saved.

7.11.4.2 Calibration of ECR

AUTION

Changing the ECR settings may seriously affect the performance of projector. Only authorized

Barco technicians can use this feature. If the values are incorrect, the light output may drop.

AUTION

Make sure the projector is equipped with an ECR dimmer inside the projector and is

tted with a

Night Vision lens. Refer to Night Vision lens installation manual for more details.

Before calibrating the ECR, make sure to disable the CLO. Ensure that the ECR and CCD are at 100% position,
otherwise set it to 100% from the Lamps menu. Refer to section "Dimmer set positions", page 118 for more
details.

180

R59770324 SIM 5W 22/12/2011

Downloaded From projector-manual.com Barco Manuals

Содержание SIM 5W




































































































































































































Результаты поиска

Содержание SIM 5W

Отзывы:

Barco SIM 5W, Руководство пользователя, Страница: 184 / 195

Результаты поиска

Содержание SIM 5W

Отзывы: