Barco SIM 5W, Руководство пользователя

Страница: 126 / 195

7. Advanced
The Manual Time of Day dialog box will be displayed.
Image 7-131
7. Use the cursor keys ← or → , the numeric keys on the RCU, or the local keypad, to set the Manual Time of Day to the desired
value.
Note: Range: 0.0 to 100.0 (i.e. %)
8. Press ENTER to activate the new Manual Time of Day settings.
9. Press BACK to return to the Lamps menu.
By changing the Manual Time of Day setting, the setting of Extended Contrast Ratio in the Set Positions menu
will be overruled, and the value in that dialog box will be changed accordingly.
If the Extended Contrast Ratio setting is changed after the adjustment of the Manual Time of Day, the Manual
Time of Day will be overruled, although the value in its dialog box will show the original value.
Restarting the projector sets the Time of Day value to 100%.
7.7.4.4 Dimmer Limits
What can be done?
It is possible to set limit values for both CCD and ECR dimmer in case of a projector with Night Vision option.
Too low values for CCD and ECR can lead to artefacts in the image. Start halfway and lower the value to fi nd the point where
artefacts start to show. This value can be entered as a limit. In this way, the projector will not allow the dimmer value to drop below
this limit.
This menu item will be greyed out if the Night Vision options is not present.
How to set the CCD limits?
1. Press the MENU key to activate the Menu bar
2. Push the cursor key ← or → to highlight Lamps in the menubar
3. Push the ↓ key to pull down the Lamps menu
4. Push the cursor key ↑ or ↓ to highlight Dimming Control
5. Push the → key to pull down the Dimming Control menu
6. Push the cursor key ↑ or ↓ to highlight Limits
7. Push the → key to pull down the Limits menu
8. Push the cursor key ↑ or ↓ to select CCD... and press ENTER to select.
122 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals