Barco SIM 5W, Руководство пользователя

Страница: 123 / 195

7. Advanced
The Set Positions dialog box will be displayed.
Image 7-125
7. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to set the Constant Contrast Dimmer (CCD) and
the Extended Contrast Ratio (ECR) to the desired value.
8. Press ENTER to activate the new dimmer settings.
9. Press BACK to return to the Lamps menu.
By changing the Extended Contrast Ratio, the setting of the Manual Time of Day will be overruled, although
the value in the dialog box of the Manual Time of Day will show its original value!
If the Manual Time of Day setting is changed after the adjustment of the Extended Contrast Ratio, the Extended
Contrast Ratio will be overruled, and the value in the dialog box will be changed accordingly.
Restarting the projector sets the Extended Contrast Ratio to 100%.
7.7.4.2 Dimmer presets
What can be done?
Four dimmer presets can be stored in the projector. In case of a projector without Night Vision option, only a value for CCD can
be entered in each preset (the ECR column is not visible). In case of a projector with the Night Vision option, each preset includes
a value for both CCD and ECR.
The target settings of the CLO menu are prior to the Preset settings. This means that if CLO mode is ON, the
dimmers will be set in the position to get the target values instead of the Preset values.
How to select a Preset?
1. Press the MENU key to activate the Menu bar
2. Push the cursor key ← or → to highlight Lamps in the menubar
3. Push the ↓ key to pull down the Lamps menu
4. Push the cursor key ↑ or ↓ to highlight Dimming Control
5. Push the → key to pull down the Dimming Control menu
6. Push the cursor key ↑ or ↓ to select Presets... and press ENTER to select.
R59770324 SIM 5W 22/12/2011 119
Downloaded From projector-manual.com Barco Manuals