Barco S3 series, Руководство пользователя

Страница: 348 / 538

12. Controller Operation
PAGE 2 via PG Down (Page 1 via PG Up respectively):
Contextual
Button Display Description
CD1 Con fi g 3 Applies the Con fi g Page to the left screen of the console
CD2 Program 3 Applies the programming page to the right screen of the console
CD3
MVR 3
Applies the MVR Setup page to the Left screen of the console
CD4 Con fi g 4 Applies the Con fi g Page to the right screen of the console
CD5 Program 4 Applies the programming page to the right screen of the console
CD6 MVR 4 Applies the MVR Setup page to the Left screen of the console
CD7 Console 3 Applies the Console Setup page to the Left screen of the console
CD8 Web 3 Applies the Web preset page to the Left screen of the console
CD9 Blank
CD10 Console 4 Applies the Console Setup page to the Left screen of the console
CD11 Web 4 Applies the Web preset page to the Left screen of the console
CD12 Dest Show/Hide Reveals or hides the Destination banner in the Left screen
Save PVW (Save Preview)
Image 12-19
Once pressed this button latches the function “Save from PVW Mode” and lights its GREEN led. This allow storing 1 or several
Templates / Presets or Cue´s after the syntax from Preview.
When the LED is RED, it indicates that the Save PGM button turned the EC-200 in “Save PGM Mode”.
Example of use:
•
PRESET # ENTER
→ Preset # is stored from Preview as new preset.
•
PRESET # ENTER
→ Preset # is overwritten from Preview if it exists.
•
PRESET ENTER
→ Next free preset number is created from Program.
If either Save PVW or Save PGM is latched and the other is pressed it cancels the previous latch.
The GUI Button Save PVW will turn red to indicate the latched record state.
Save PGM (Save Program)
Image 12-20
Once pressed this button latches the function “Save from PGM Mode”. This allows storing 1 or several Templates / Presets or Cue´s
after the syntax from Preview.
As the Button does not have a LED internally it will light up the LED of the Save PVW button in Red.
Example of use:
•
PRESET 5 ENTER
→ Preset 5 is stored from Program as new preset.
•
PRESET 5 ENTER
→ Preset 5 is overwritten from Program if it exists;
•
PRESET ENTER
→ Next free preset number is created from Program.
If either Save PGM or Save PVW is latched and the other is pressed it cancels the previous latch.
344 R5905948 EVENT MASTER DEVICES 17/07/2017