Barco S3 series, Руководство пользователя

Страница: 342 / 538

12. Controller Operation
12.14 Function Button For Syntax
Destination
Image 12-6
Destination refers to the most downstream location in the chain, usually a screen. See the earlier Chapters for the de fi nition of
Destination.
When DEST is pressed it lights its blue LED and opens the syntax entry for numbers and modi fi ers as per above.
The contextual Buttons to the right of the numpad also light up and is populated with functionality that can be used in the syntax.
These are:
Contextual
Button
Display Description
CD1 AUX
•
DEST + AUX
#
ENTER
select the Aux #, just as clicking it in the GUI.
•
DEST + AUX 1 + 2 + 5 ENTER
will select Aux 1, 2 and 5.
•
DEST + AUX - 2 ENTER
will unselect Aux 2, but 1 and 5 stays selected
•
DEST + AUX CLEAR
will unselect all Aux Destinations
CD2 BG Input Once pressed allows for assigning BG Input via number entry on keypad.
0 is Matte and maps the WH1 Red, WH2 Green, WH 3 Blue
CD3 Empty
CD4 Empty
CD5 Empty
CD6 Empty
CD7 Toggle Activate Toggle mode on selected destinations BG on/off .
CD8 Transition curve will toggle between Linear / S-curve / Log / Exp.
CD9 Empty
CD10 Empty
CD11 Freeze PGM Freezes Program in selected Destinations including Sources and Backgrounds.
CD12 Empty
Layer
Image 12-7
Layer refers to a layer that can hold live video. See the earlier Chapters for the de fi nition of Layer.
When Layer is pressed it lights its blue LED and opens the syntax entry for numbers and modi fi ers as per below:
•
LAYER # ENTER
will select LAYER #, just as clicking it in the GUI.
•
LAYER 1 + 3 + 5 ENTER
will select LAYER 1, 3 and 5 just as clicking it in the GUI with Multiple Select on.
•
LAYER – 3 ENTER
will unselect LAYER three, but 1 and 5 stays selected just as clicking it in the GUI with Multiple Select on.
Multiple Select for Layers does not really apply to this way of selection.
•
LAYER CLEAR
will deselect all layers.
The contextual Buttons to the right of the numpad also light up and is populated with functionality that can be used in the syntax.
These are:
Contextual
Button Display Description
CD1 PIP Selects selected Layer as PIP, indicates that by color Green backlight.
CD2 KEY Selects selected Layer as KEY, indicates that by color Red backlight.
CD3 Empty
338 R5905948 EVENT MASTER DEVICES 17/07/2017