Barco S3 series, Руководство пользователя

Страница: 176 / 538

6. EM GUI orientation
How to access the layer adjustments
Adjustments to layers are performed in the “Adjust” panel:
1. Select the layer from the list
Or,
Select the layer from the preview canvas.
The layer is selected.
Image 6-59
When the layer is selected and is visible on the canvas, it will have a blue highlight around the layer.
2. Click on the Adjust tab that is on the top of the adjustment area.
The layer adjustment panel is displayed.
It is possible to select multiple layers by clicking on the each targeted layer once Multiple Select is set to ON.
Layer adjustment panel description
The Layer adjustment panel allows access to general layer adjustments and takes effect only if a layer is selected.
Layer adjustments are performed on individual layers. When multiple layers are selected, the adjustments are
disabled.
The upper part of the panel is always visible:
This part includes:
• Layer type : Layer can be a PIP or a Key. The available
adjustments depend on the selected mode.
• Keyframes : There are 2 KeyFrames per layer.
The lower part of the panel provides menus for layer sizing and color adjustments
• Main adjustment : Border and Shadows
• Layer Window adjustment: Size, Position, Mask
• Layer Color Effects adjustment: Brightness, Contrast,
Gamma, Hue, Saturation, Monochrome, Invert
PIP / KEY selection
The fi rst selection is the choice for the layer type: PIP or a Key. Depending on the selection, the rest of the menu will adapt.
Keyframes
In a PIP “move,” Keyframe is a point where an action or a change occurs. For example, a PIP movement is described by two
keyframes. The
fi rst keyframe is the state of the PIP at the initial point of the movement. The second keyframe is the point where
the PIP moves to. The size and color attributes can also change during the move.
By default, the initial position and state of the layer is keyframe 1. The user can change the size, and change the border and shadow
parameters before de
fi ning Keyframe2. After changes are done to Keyframe1, the second keyframe can be added by pressing
the “Add KF” button. A new position and size can be de
fi ned and adjustments to the border and shadow parameters to de fi ne the
second Keyframe.
172 R5905948 EVENT MASTER DEVICES 17/07/2017