LAYOUT
Zoom
Due to the fact that some consumers may still be using older television systems, some TV
programs may not display the edges of the image. Use this function to hide the image edge
by choosing one of the following three options:
•
Off
Setting it to off makes no change to the projected image.
•
Crop
Setting it to "Crop" will add two "masks" equivalent to 3% of horizontal resolution on either
side of the image and two similar masks above and below the projected image.
•
Zoom
You can use this function to enlarge the image's horizontal resolution over the 106% of the
default aspect ratio. Any portion that exceeds the original image will be cropped.
When you set aspect ratio to "Native", be sure to set Zoom to "Off" or "Crop".
16:10
Off
Crop
Zoom
5:4
2.35
Main Select
When you want to project PIP image, use this function to specify the image
source for the PIP image. This function is identical to Input Selection; for more
information, please refer to the section on Input Selection.
6
OSD Menu description
