Barco - RHDM-2301 - User manual ____________________________________________________ 31
How to
3.10 How to select a color channel
Figure 16: Location of buttons to select a color channel
1. Set the color channel
• Press (
)
• Select “Channel selection”
Move with the trackball to highlight “Channel selection”
Press (
)
or (
)
to activate the “Channel selection” option. The set-
ting is applied immediately to the selected window.
• Select the color channel
Move with the trackball to highlight a color channel
Press (
)
or (
)
to select a color channel. The setting is applied
immediately to the selected window.
• When “Show in monochrome” is selected, the selected color channel will be shown in
monochrome.
• Press (
)
to exit the color adjustments toolbox.
2. Toggle between full color and the selected setting
• Press (
)
. The setting is applied immediately to the selected window.
NOTE
:
•
The color channel selection toolbox shows the selected color channel for the active window only.
•
When only one color channel is selected, the cal/err indicator light will light-up orange to alert the
user the display unit is working out of the calibrated range.
Track ball
