Barco R9861520NA, Руководство по установке

Страница: 30 / 85

4. CSE-200 Installation
1. Right click on the sound icon in the system tray and select Playback devices . The Sound window opens.
2. Select Speakers ClickShare, select Set default and click Apply .
4.7 LAN connection
About LAN connection
The Base Unit can be connected to a local network or directly to a laptop. For normal operation, a LAN connection is not necessary.
The LAN connection can be used:
•
to con fi gure your CSE-200 unit
• to update the software
• for maintenance purposes
• for network integration of your CSE-200 unit
How to connect
1. Insert a network cable with RJ-45 connector into the LAN port.
2. Connect the other side to a LAN.
4.8 Power connection
About power
This product is intended to be supplied by a UL Listed Power Unit marked “Class 2” or “LPS” or “Limited Power Source” with output
rated 12 VDC 1.5A min or Power over Ethernet (PoE) Plus IEEE802.3at Type 2 compliant Power Sourcing Equipment (PSE) rated
42.5-57 VDC, 0.4-0.3A.
An external power adapter is delivered with the product.
Once the Base unit is powered, it starts up. Then the power button can be used to switch on or off.
How to connect the external power adapter.
1. Plug the barrel connector of the power adapter into the power input of the Base unit.
2. Slide a power input adaptor piece (US, CN, EU or UK) on the power adapter of the ClickShare . Use the one which is applicable
in your country.
a) Slide down the button on the adapter (1).
b) Insert the latch (2) of the adapter piece into notch (3)
1
2
3
Image 4-4
Mounting adapter piece
18 R5900023 CLICKSHARE CSE-200 13/07/2016